01 — Travertine Collection · 6 finishes
Open pores, no quarry.
The pitted, open-pore face of travertine — moulded rather than cut, so it arrives light, flexible and Class A fire-rated. Six finishes from warm beige to Roman grey.
Specifications
| Material | MCM flexible surface (modified inorganic mineral powder) |
|---|---|
| Base materials | Non-metallic industrial tailings, construction waste, stone powder, natural coloured sand |
| Forming process | 3D moulding under controlled temperature curve |
| Thickness | 2 – 6 mm (varies by finish) |
| Weight | 3 – 6 kg/m² — roughly 1/5 of porcelain tile, 1/10 of natural stone |
| Min. bend radius | 0.3 m |
| Fire rating | Class A |
| Standards | Meets EU CE requirements |
| Weathering | Freeze–thaw and UV resistant; vapour-permeable, water-resistant |
| Service life (exterior) | 30 years or more |
| Bonding | External bonding without hollowing |
| Environmental | Zero-emission production, recyclable material, formaldehyde-free, low VOC |
| Application | Interior · Façade |
Sheet sizes, fire-test classification references and CE certificate numbers are issued with the technical specification sheet — request it via the button above.
Highlights
No block-to-block variation
Natural travertine varies from block to block. A moulded face repeats predictably, so large elevations stay consistent.
Pores without porosity
The look of open-pore stone, on a body that is vapour-permeable but water-resistant.
Class A, interior and façade
Every finish in every collection shares the same mineral body, fire rating and CE compliance.
